Cronologic Ndigo Crate Guía de usuario descargar pdf (Pagina 41)

created.

NOT IMPLEMENTED

ndigo bool t reserved1

Defaults to false. Do not change.

int start

The number of samples from the ﬁrst input signal seen in the idle state until the gating output

is set.

int stop

The number of samples from leaving the idle state until the gating output is reset. If retriggering

is enabled the timer is reset to the value of the start parameter whenever the input signal is set

while waiting to reach the stop time.

int sources

A bit mask with a bit set for all trigger sources that can trigger this channel. The gates cannot

use the additional digital trigger sources NDIGO TRIGGER SOURCE TDC PE to

NDIGO TRIGGER SOURCE BUS3 PE.

#deﬁne NDIGO TRIGGER SOURCE A0 0x00000001

#deﬁne NDIGO TRIGGER SOURCE A1 0x00000002

#deﬁne NDIGO TRIGGER SOURCE B0 0x00000004

#deﬁne NDIGO TRIGGER SOURCE B1 0x00000008

#deﬁne NDIGO TRIGGER SOURCE C0 0x00000010

#deﬁne NDIGO TRIGGER SOURCE C1 0x00000020

#deﬁne NDIGO TRIGGER SOURCE D0 0x00000040

#deﬁne NDIGO TRIGGER SOURCE D1 0x00000080

#deﬁne NDIGO TRIGGER SOURCE TDC 0x00000100

#deﬁne NDIGO TRIGGER SOURCE GATE 0x00000200

#deﬁne NDIGO TRIGGER SOURCE BUS0 0x00000400

#deﬁne NDIGO TRIGGER SOURCE BUS1 0x00000800

#deﬁne NDIGO TRIGGER SOURCE BUS2 0x00001000

#deﬁne NDIGO TRIGGER SOURCE BUS3 0x00002000

#deﬁne NDIGO TRIGGER SOURCE AUTO 0x00004000

#deﬁne NDIGO TRIGGER SOURCE ONE 0x00008000

3.4.5 Structure ndigo extension block

The extension block is not used in the Ndigo250M.

cronologic GmbH & Co. KG 37 Ndigo250M-14 User Guide

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 56 57

Sin comentarios

Cronologic Ndigo Crate Guía de usuario Pagina 41